dmesg - MSI NVIDIA GeForce GTX 560 Ti
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-50-generic (buildd@lgw01-03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #67~14.04.1-Ubuntu SMP Fri Oct 2 22:07:51 UTC 2015 (Ubuntu 3.16.0-50.67~14.04.1-generic 3.16.7-ckt16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000bad89fff] usable
BIOS-e820: [mem 0x00000000bad8a000-0x00000000baddbfff] ACPI NVS
BIOS-e820: [mem 0x00000000baddc000-0x00000000bae07fff] reserved
BIOS-e820: [mem 0x00000000bae08000-0x00000000bae08fff] usable
BIOS-e820: [mem 0x00000000bae09000-0x00000000bae0bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bae0c000-0x00000000bae0cfff] ACPI data
BIOS-e820: [mem 0x00000000bae0d000-0x00000000bae16fff] ACPI NVS
BIOS-e820: [mem 0x00000000bae17000-0x00000000bae3bfff] reserved
BIOS-e820: [mem 0x00000000bae3c000-0x00000000bae7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bae7f000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3, BIOS P1.60 07/13/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x33fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0BB800000 mask FFF800000 uncachable
4 base 0BC000000 mask FFC000000 uncachable
5 base 0C0000000 mask FC0000000 uncachable
6 base 33FE00000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3000MB, range: 8MB, type UC
reg 4, base: 3008MB, range: 64MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
reg 6, base: 13310MB, range: 2MB, type UC
total RAM covered: 12214M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 4GB, type WB
reg 6, base: 12GB, range: 1GB, type WB
reg 7, base: 13310MB, range: 2MB, type UC
e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] mapped at [ffff8800000fcf40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x33fc00000-0x33fdfffff]
[mem 0x33fc00000-0x33fdfffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x33c000000-0x33fbfffff]
[mem 0x33c000000-0x33fbfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x33bffffff]
[mem 0x300000000-0x33bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xbad89fff]
[mem 0x40200000-0xbabfffff] page 2M
[mem 0xbac00000-0xbad89fff] page 4k
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
init_memory_mapping: [mem 0xbae08000-0xbae08fff]
[mem 0xbae08000-0xbae08fff] page 4k
init_memory_mapping: [mem 0xbae7f000-0xbaffffff]
[mem 0xbae7f000-0xbaffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 2M
RAMDISK: [mem 0x35ad6000-0x36d62fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BADD4068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BADDB3A8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BADD4150 007253 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BAE0EF80 000040
ACPI: APIC 0x00000000BADDB4A0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BADDB518 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BADDB620 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 0x00000000BADDB660 0000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BADDB738 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fdfffff]
Initmem setup node 0 [mem 0x00000000-0x33fdfffff]
NODE_DATA [mem 0x33fdf1000-0x33fdf5fff]
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333400000-ffff88033f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x33fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xbad89fff]
node 0: [mem 0xbae08000-0xbae08fff]
node 0: [mem 0xbae7f000-0xbaffffff]
node 0: [mem 0x100000000-0x33fdfffff]
On node 0 totalpages: 3123368
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11885 pages used for memmap
DMA32 zone: 760588 pages, LIFO batch:31
Normal zone: 36856 pages used for memmap
Normal zone: 2358784 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xbad8a000-0xbaddbfff]
PM: Registered nosave memory: [mem 0xbaddc000-0xbae07fff]
PM: Registered nosave memory: [mem 0xbae09000-0xbae0bfff]
PM: Registered nosave memory: [mem 0xbae0c000-0xbae0cfff]
PM: Registered nosave memory: [mem 0xbae0d000-0xbae16fff]
PM: Registered nosave memory: [mem 0xbae17000-0xbae3bfff]
PM: Registered nosave memory: [mem 0xbae3c000-0xbae7efff]
PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88033fa00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3074407
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12194308K/12493472K available (7631K kernel code, 1131K rwdata, 3616K rodata, 1352K init, 1300K bss, 299164K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3092.965 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.93 BogoMIPS (lpj=12371860)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29276 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24743.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbad8a000-0xbaddbfff] (335872 bytes)
PM: Registering ACPI NVS region [mem 0xbae09000-0xbae0bfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbae0d000-0xbae16fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xbae3c000-0xbae7efff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 7:39:46, date: 10/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88032E138C00 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88032E0E4E40 000084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xfa400000-0xfa7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfa908000-0xfa90800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfa907000-0xfa9073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfa900000-0xfa903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfa906000-0xfa9063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa905000-0xfa9057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa904000-0xfa9040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfa000000-0xfa07ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfa080000-0xfa083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfa800000-0xfa807fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfa800000-0xfa8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbad8a000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbae09000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x33fe00000-0x33fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0400-0x0453] could not be reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.4: PCI bridge to [bus 03-04]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfa800000-0xfa8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfa800000-0xfa8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18996K (ffff880035ad6000 - ffff880036d63000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb6d8a000-0xbad8a000] (64MB) mapped at [ffff8800b6d8a000-ffff8800bad89fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1445326786.656:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 23854
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 44 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfa907000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-50-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfa906000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-50-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-50-generic xhci_hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-50-generic xhci_hcd
usb usb4: SerialNumber: 0000:06:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c7575870d83e372c7bbe36cb1e9c072de0dfffbd'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:401:673
hash matches /build/linux-lts-utopic-AGrQQm/linux-lts-utopic-3.16.0/drivers/base/power/main.c:607
rtc_cmos 00:02: setting system clock to 2015-10-20 07:39:47 UTC (1445326787)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 548K (ffff880001777000 - ffff880001800000)
Freeing unused kernel memory: 480K (ffff880001b88000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 46 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018ea000, 00:25:22:e7:12:a0, XID 0c900800 IRQ 46
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905380 irq 47
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata3.00: ATAPI: ATAPI iHAS324 B, AL1B, max UDMA/100
ata3.00: configured for UDMA/100
ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD204UI 0001 PQ: 0 ANSI: 5
hub 1-1:1.0: USB hub found
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
hub 1-1:1.0: 6 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: CD-ROM ATAPI iHAS324 B AL1B PQ: 0 ANSI: 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 >
sd 4:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
random: init urandom read with 78 bits of entropy available
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (203) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (205) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (208) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (209) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (211) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (214) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (215) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (217) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
usb 1-1.3: New USB device found, idVendor=046d, idProduct=0a29
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Logitech Wireless Headset
usb 1-1.3: Manufacturer: Logitech
usb 1-1.3: SerialNumber: 000D44B17912
tsc: Refined TSC clocksource calibration: 3092.972 MHz
Adding 1999868k swap on /dev/sdc8. Priority:-1 extents:1 across:1999868k SSFS
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
systemd-udevd[378]: starting version 204
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: G500
usb 2-1.1: Manufacturer: Logitech
usb 2-1.1: SerialNumber: 5D27795AE10018
lp: driver loaded but no devices found
random: nonblocking pool is initialized
ppdev: user-space parallel port driver
usb 2-1.2: new full-speed USB device number 4 using ehci-pci
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
usb 2-1.2: New USB device found, idVendor=045e, idProduct=0768
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X4 Keyboard
usb 2-1.2: Manufacturer: Microsoft
AVX version of gcm_enc/dec engaged.
i915 0000:00:02.0: enabling device (0006 -> 0007)
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
hidraw: raw HID events driver (C) Jiri Kosina
i915 0000:00:02.0: irq 49 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
audit: type=1400 audit(1445319588.857:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
audit: type=1400 audit(1445319588.857:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:046D:0A29.0001/input/input5
hid-generic 0003:046D:0A29.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:1a.0-1.3/input3
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C068.0002/input/input6
hid-generic 0003:046D:C068.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.1/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C068.0003/input/input7
hid-generic 0003:046D:C068.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.1/input1
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:0768.0004/input/input8
hid-generic 0003:045E:0768.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X4 Keyboard] on usb-0000:00:1d.0-1.2/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:045E:0768.0005/input/input9
hid-generic 0003:045E:0768.0005: input,hidraw4: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X4 Keyboard] on usb-0000:00:1d.0-1.2/input1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
usbcore: registered new interface driver snd-usb-audio
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.93 Wed Aug 19 16:49:15 PDT 2015
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
EXT4-fs (sdc6): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: Failed to spawn smbd main process: unable to execute: No such file or directory
init: Failed to spawn samba-ad-dc main process: unable to execute: No such file or directory
init: failsafe main process (806) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
init: cups main process (1009) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
cgroup: systemd-logind (994) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: winbind main process (2086) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2111) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2142) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2152) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2161) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2164) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2167) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2172) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2176) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2179) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2182) terminated with status 127
init: winbind respawning too fast, stopped
init: Failed to spawn nmbd main process: unable to execute: No such file or directory
aufs 3.x-rcN-20140707
Bridge firewalling registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
audit_printk_skb: 144 callbacks suppressed
audit: type=1400 audit(1445319595.173:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="docker-default" pid=2247 comm="apparmor_parser"
audit: type=1400 audit(1445319619.776:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2337 comm="apparmor_parser"
audit: type=1400 audit(1445319619.776:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2337 comm="apparmor_parser"
audit: type=1400 audit(1445319619.776:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2337 comm="apparmor_parser"
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
usb 1-1.4: New USB device found, idVendor=1949, idProduct=0004
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Amazon Kindle
usb 1-1.4: Manufacturer: Amazon
usb 1-1.4: SerialNumber: B02416043134003F
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-1.4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdd] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdd: detected capacity change from 1432354816 to 0
usb 1-1.4: USB disconnect, device number 4
usb 1-1.4: new high-speed USB device number 5 using ehci-pci
usb 1-1.4: New USB device found, idVendor=1949, idProduct=0004
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Amazon Kindle
usb 1-1.4: Manufacturer: Amazon
usb 1-1.4: SerialNumber: B02416043134003F
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-1.4:1.0
scsi 7:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: [sdd] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1.4: USB disconnect, device number 5
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
sd 7:0:0:0: [sdd]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 1-1.4: new high-speed USB device number 6 using ehci-pci
usb 1-1.4: New USB device found, idVendor=1949, idProduct=0004
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Amazon Kindle
usb 1-1.4: Manufacturer: Amazon
usb 1-1.4: SerialNumber: B02416043134003F
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-1.4:1.0
scsi 8:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:0: [sdd] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
usb 1-1.4: reset high-speed USB device number 6 using ehci-pci
usb 1-1.4: can't restore configuration #1 (error=-110)
usb 1-1.4: USB disconnect, device number 6
sdd: detected capacity change from 1432354816 to 0
usb 1-1.4: new high-speed USB device number 7 using ehci-pci
usb 1-1.4: New USB device found, idVendor=1949, idProduct=0004
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Amazon Kindle
usb 1-1.4: Manufacturer: Amazon
usb 1-1.4: SerialNumber: B02416043134003F
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-1.4:1.0
scsi 9:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg4 type 0
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: [sdd] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdd: detected capacity change from 1432354816 to 0
usb 1-1.4: USB disconnect, device number 7
usb 1-1.4: new high-speed USB device number 8 using ehci-pci
usb 1-1.4: New USB device found, idVendor=1949, idProduct=0004
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Amazon Kindle
usb 1-1.4: Manufacturer: Amazon
usb 1-1.4: SerialNumber: B02416043134003F
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-1.4:1.0
scsi 10:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sdd] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 0f 00 00 00
sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 10:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdd: detected capacity change from 1432354816 to 0
perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-1.4: USB disconnect, device number 8
audit: type=1400 audit(1445351601.625:63): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/etc/xfce4/defaults.list" pid=15397 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
init: apport post-stop process (19506) terminated with status 1
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 6720 MB/s
raid6: sse2x2 9712 MB/s
raid6: sse2x4 12062 MB/s
raid6: using algorithm sse2x4 (12062 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 24656.000 MB/sec
Btrfs loaded